Simple water pressure sensor
The PS-1 Irrigation Pressure Switch adds irrigation water on/off data into the soil moisture data set. A useful parameter to add to any data set when using soil moisture sensors to monitor irrigation.
The PS-1 registers ON at 5 PSI (±1.0 PSI). Because the sensor must be plumbed into the irrigation line, your data logger should be located where this can be done conveniently and cleanly.
Specifications
| Set Point | 5 psi switch (± 1 psi) |
| Maximum Pressure | 250 psi |
| Burst Pressure | 750 psi |
| Connection | 1/8 NPT male brass |
| Enclosure Rating | NEMA 4, 13 |
| Diaphragm Material | Buna-N |
| Electrical Connection | 5 m cable with 3.5 mm connector for use with METER ZL6, Em50/50G, EM60/60G series loggers |
| Accessories | BUSHING, 1/8″ NPT female x 1/4″ NPT male, brass |
